Quinta TB

Quinta TB

Made in Germany
Available at authorized resellers
Article Number: 729604

Digital, wireless boundary microphone


• Direct Sequence Spread Spectrum (DSSS) provides high immunity from interference and unauthorised listening, even when using other radio systems

• Wireless transmission with integrated True Diversity Wireless systems with True Diversity technology have two separate receiver components in the receivers – one for each antenna. In order to increase the reception quality, the receiver automatically switches to the antenna signal that is stronger at the moment. This can greatly reduce the risk of signal quality deterioration and dead spots that suddenly arise, such as when a singer moves around on the stage.antenna technology for transmitting and receiving

• Three selectable frequency bands : 2.4 / 5.2 / 5.8 GHz

• Automatic or manual silent change to an interference-free frequency response acc. to EN 3000328 ETSI

• Digital 128-bit encryption and additional 24-bit PIN code against unauthorised listening

• Parameters can be programmed via the control unit and the appropriate configuration software

• Automatic Power OFF when the control unit is in the stand-by mode or switched off

• Power supply via integrated NiMH batteries

• Charging status of the battery can be monitored and transmitted to the control unit

• Operating control LED indicates the status when the minimum capacity is too low

• Minimum operating time of 16 hours

• DC connector for power supply operation and charging

• Operating modes in the Conference Mode: Manual, Override, Push-To-Talk, Push-To-Mute

• Operating modes in the Microphone Mode: On/Off, Push-To-Mute, Global Mute

• Semi-cardioid polar pattern

• Three-coloured backlit soft touch button with braille inscription to switch the microphone on or off

• High-quality housing of synthetic material with a non-glare coating of Alexit soft-touch paint

• Microphone grille in stainless steel look


beyerdynamic GmbH & Co. KG
Theresienstr. 8
D-74072 Heilbronn

Phone: +49 (0)7131 - 617-400

technical data


Spec Sheet

Planning aids

Declaration of conformity

For more downloads please refer to our Service section.

Find distributors